IDG Hesychia SIXK RAW Silencer (IDG-SIXK-RAW-28)

UPC: 00850078995001

MPN: IDG-SIXK-RAW-28

Product Attributes

Caliber/Gauge: 6mm
Store Inventory
Available Online: 1In Store: 1

Availability by location

$1,154.00

Hesion Bow Lock System

The Hesion Bow is a revolutionary dual-locking mechanism that sets the HESYCHIA series apart, delivering unmatched security and durability without complexity. Flexure pawls are printed within the suppressor body under protective hoods to provide six bi-directional indexing arms that engage within 32 grooves around the outer edge of the muzzle device. This is the only secondary locking system that is integral to the suppressor itself, adding only .5 oz. to the entire system.

The primary lock is still the 15-degree taper and the 1 1/8″-8 left-hand American Buttress Thread. With a 15-degree taper over 0.25″ of length, just 15 ft./lbs. of torque generates over 1,700 lbs. of sealing force. This ensures gas management and concentric alignment under the intense pressures of a gunshot. The American Buttress Thread maximizes thread engagement and torque conversion and requires less than 2.5 rotations to achieve full taper lock.

While the 15-degree taper and American Buttress Thread as a stand alone quick detach locking system are enough on their own, the Hesion Bow system provides redundant and extremely light weight peace of mind that your silencer is secured. Two is one, one is none.

  • Six flexure pawls printed into the suppressor body
  • Thirty-two locking grooves on the muzzle device
  • Integral redundant retention
  • 15-degree taper over 0.25″ of length
  • 1 1/8″-8 left-hand American Buttress Thread
  • Less than 2.5 rotations to full taper lock

Back-pressure is controlled at the beginning. The muzzle device, blast chamber, early intake geometry, and first redirections matter more than most suppressor marketing will ever admit. That is where the real leverage is.

Gas enters a radial diamond structure in the initial chamber, gets disrupted and cooled, then gets pulled into annular pathways early, before the first blast baffle has a chance to become a pressure traffic jam. The goal is not simply to trap more gas. The goal is to move pressure off the muzzle immediately and distribute it across the entire suppressor so the gun cycles more like itself.

Laser Powder Bed Fusion matters here because the gas management architecture would be crippled if it had to be designed around drill paths, lathe access, or simple stacked components. Early annular intakes, captured helix paths, shielded ports, monolithic pawls, heavy internal filleting, and complex exterior textures are possible because the structure is printed as one piece and the critical interfaces are machined afterward.

Inconel 718 is the material choice because it holds its shape, resists erosion, and survives thermal cycling in a way that fits what this suppressor is built to do. It is not the lightest option and not the cheapest option. It is the one that makes the geometry viable under real rifle heat and use cycles.

The SIXK takes all four IDG muzzle devices. The Hybrid Flash Hiders and the Flow Enhancers do different jobs. The HFH and Micro HFH are the better all-around answer when the rifle has to do both jobs, suppressed and unsuppressed. The Flow Enhancers make the most sense when the host is basically suppressor-dedicated and the priority is to enhance suppressor performance rather than preserve unsuppressed civility.

Design Envelope

The SIXK is full auto rated for 10.3″ barrels and above. The minimum recommended barrel length for current 5.56 and 6mm rifle suppressors in this system is 10.3″, and going shorter increases blast baffle erosion and raises projectile stability risk.

The design target was not 10.3″ and shorter. The design target was an ultra low back pressure suppressor that could tolerate hard use, hot calibers, and high pressure without requiring the customer to retune the host just to make the system work. The pressure reality of 6 ARC was part of that target from the beginning, which is also why the system is well suited to strong SBR performance while still making sense on longer barrels.

Specifications
MPN IDG-SIXK-RAW-28
UPC 00850078995001
Manufacturer Irregular Design Group
Caliber/Gauge 6mm

LOCAL SHOPPERS: Planning to swing by the shop to check this out? Certain items ship into City Arsenal from our warehouse inventory, so give us a quick call at (864) 250-2007 to double-check shelf stock before heading over!

Customer Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.